PDR Tool Tip Holder – TipTamer Type 1

£27.00£29.00 +VAT

Magnetic holder for the standard 5/16″UNC Screw in tips

The Type 1 is a square(ish) plate 94mm x 98mm which is designed to fit easily into the smaller square holes on a TDN Cart. Comprises 9 holes with strong magnets fitted below for Holding your spare PDR Tool Tips neatly and securely, thus reducing your time in screwing and unscrewing them from a traditional threaded tip holder.

SKU: E01WTT01 Category:

The 'TipTamer'™ Type 1 PDR Tool Tip Holder has 9 equally spaced holes that are far enough apart for a regular tip of 30mm (1 1/4") diameter or less to fit into every hole and still have enough finger space to pick each one out easily. The red or blue plastic covered mushroom tips for example, will fit side by side without a problem because there are fewer tips in the same space as that of the Type 2, which has 16 holes.

If you wish to store smaller diameter tips or easily remove it from the cart, take a look at some of the other 'TipTamer'™ models as we have various other designs that are still being developed.

The Type 1 'TipTamer'™ is around 9mm thick and has its neodymium disc magnets fitted into the bottom face. If used on a TDN cart in the small square holes, it will be a nice snug fit that won't rattle around or be easily lifted out or stolen! If you placed it on a steel surface, such as a steel drawer or a steel trolley top, the 9 neodymium magnets will hold it tightly to the steel and it will be fairly difficult to move or remove. (A good strong grip with one hand should do it, but it will surprise you how well it hangs on, so if there is any grit or swarf between it and the substrate, be aware that sliding it could cause scratching of the surface). For this reason, it is not recommended to place it on a painted car panel, however, we produce other 'TipTamers' with fewer magnets which will have less adhesion properties to a steel substrate, making them more suitable for taking off your cart to have handy by the panel you are working on.

There are 11 different Coloured versions to complement your company colour scheme or cart colour and we aim to produce several different sizes to fit different tool cart sections. So, if you don't see what you are looking for, use the contact us page and drop us a line, we may be able to design and build exactly what you need for less than you'd think! It costs nothing to ask! 🙂

Thanks for your custom.

Colin Wood, Director, Woodpecker UK Ltd.

Additional information

Weight 0.4 kg
Dimensions 10 × 10 × 1 cm

Black, Silver, Grey, White, Pink, Deep Blue, Green, Golden Yellow, Day Glow Yellow, Orange, Red